The Revolution Top Floats – Why?


Marty Sagendorfby:  Martin Sagendorf

We often think we see forces.  However, in reality, we only see the results of forces.  To understand forces we must believe in Newton’s Third Law.  It states that all forces can only exist in opposite pairs and be equal in magnitude.  And… what is very interesting is that Newton’s Third Law does not stipulate that the forces be of the same kind.

Also, by Newton’s Second Law: If the (net) forces are equal, there will be no accelerations (Fnet = ma = 0)… in other words… equal and opposite (net) forces create a state of equilibrium.  An interesting example of equal and opposite (and unlike-type) forces is that exhibited by a combination of opposed magnetic fields within a gravitational (force) field.  These two different (types) of fields interact purely as ‘force fields’ – only their forces matter… not their types.

The Cosmic Magnetic Puzzle exemplifies a combination of such forces: a barbell containing two ‘donut’ magnets supported in mid-air above stationary pairs of magnets – with an additional pair of donut magnets maintaining the horizontal location of the barbell.

Read the rest of this entry »


Atomic Penny Vaporizer


Marty Sagendorfby: Martin Sagendorf

Imagine students’ amazement when they actually see sunlight melt a penny with the Atomic Penny Vaporizer!  This demonstration clearly illustrates the vast amount of energy illuminating the Earth’s surface.  In rough numbers: 70% of the Sun’s incident energy on our outer atmosphere is reflected back into space – only about 30% actually gets to the Earth’s surface.  But, as we experience, this is still a substantial quantity of energy.

Fortunately, this energy (I. R. – Visible – U. V.) is rather uniformly distributed over the Earth’s surface –  thus its overall intensity is such that we have a habitable environment.  However, as we all know, we can concentrate some ‘area’ of this energy to increase the ‘energy per area’ (a measure of this is the temperature of the area of concentrated energy).  A common magnifying lens (2-4 in. diameter) will concentrate sufficient energy to burn paper or other objects with a low flash point. Read the rest of this entry »


Density Activities With The W-Tube


Tami O'Connor, Educational Innovationsby: Tami O’Connor

The W-Tube is a device that was invented and developed by Ron Perkins, Chemistry and Physics high school teacher for 33 years and founder of Educational Innovations.  This amazing teaching tool was designed to have students in every grade level, kindergarten through high school, discover and gain a deeper understanding of concepts relating to density and air pressure.

In order to solve each puzzle, students need to have a basic understanding of density and air pressure.  Depending upon the grade level of your students, you may want to conduct a few experiments or demonstrations prior to having them attempt the W-Tube challenges on their own.  The following two activities do not utilize the W-Tube, however they will provide some younger students with the background knowledge necessary to successfully complete the W-Tube challenges.

This first activity is a valuable demonstration that shows that air takes up space.  Start by balling up a paper towel or tissue and affixing it to the bottom of a plastic cup using two-sided tape.  Invert the cup with the tissue inside and then push the plastic cup into a clear container of water so the cup is completely submerged.  Your students should be able to see that, although the air is somewhat compressed within the cup, the paper at the “top” of the cup remains dry. Read the rest of this entry »


Cartesian Divers


Ron Perkins, Educational Innovationsby: Ron Perkins

Cartesian Divers are one of the oldest and most interesting toys you can build at home.  While they are easy to construct, there is a lot of science behind the workings of this deceivingly simple toy.  A Cartesian Diver is an object whose density changes with pressure.  In fact, most Cartesian divers become denser as pressure is increased.  By constructing a Cartesian Diver carefully, it is possible to make a diver that floats in water at atmospheric pressure, and sinks when the pressure is increased.

Water has a density of about 1 gram/ml.  Objects that have a density of less than 1 gram/ml float, while objects with a density greater than 1 gram/ml sink.  When using sealed divers, as pressure is increased, a Cartesian Diver’s density might increase from about .8 grams/ml to 1.2 grams/ml.  When this happens, the diver sinks in water.  Cartesian Divers often change their density by changing the amount of water they displace (i.e., changing their volume).  When the pressure is increased, the air inside the diver is compressed.  This compressed air takes up less space, and thus displaces less water.  As less water is displaced, the density of the diver appears to increase and the diver sinks.

Making Cartesian Divers

Materials:

1 Plastic Pipet (PP-222), 1 Ballast Nut (CD-3), Plastic Soda Bottle with Top, Candle, Scissors, Pliers, Water

Optional: cap of a Fizz-Keeper Pump (CD-4), Food Coloring, Aluminum Foil, Hot Melt Glue Gun

Instructions

1.  With scissors, snip off all but 2 cm of the neck of the pipet.

Cartesian Divers - Educational Innovations Blog

2.  Screw one ballast nut onto the remaining 2 cm neck of the pipet.

Cartesian Divers - Educational Innovations Blog

Cartesian Divers - Educational Innovations Blog3.  Fill the pipet bulb with colored water.  Note that the bulb must float when placed in a cup of water.  Experiment with different amounts of water, making sure that the bulbs still float.  Bulbs that float higher in a cup of water will make divers that are more difficult to sink.

4.  Your Cartesian diver is ready!  Fill a 1 or 2 liter plastic soda bottle almost to the top with water.  Place your diver in the bottle and screw on the Fizz-Keeper pump cap.  Try squeezing the bottle.  Can you make your diver sink?  Now pump the Fizz-Keeper and watch as your diver sinks right to the bottom.  Can you figure out how to get it back up to the top?

5.  Remove the pump cap, pour out your diver, and try varying its buoyancy.  Try filling it with different amounts of water.  Put it back in the bottle, replace the pump cap and try sinking it again.

6.  When you are satisfied with your divers and would like to make it permanent, you can seal it by sealing the open end of the bulb.  This can be done with any waterproof glue, hot glue, or by melting the plastic stem slightly and squeezing it gently with small pliers.

To seal the bulb by melting, first make sure your bulb floats.  Once it is sealed, its starting buoyancy cannot be changed! Make sure there is no water in the neck by holding it upside down and tapping or squeezing it slightly.  Hold the neck about 1-2 inches above a candle flame until it becomes completely transparent (the change is very subtle).  Immediately remove the neck from above the flame and squeeze the end gently with pliers to seal.  Let cool.  Return your diver to the bottle with clean water and it will last for many years.

There are literally hundreds of experiments you can try!  For instance, try crumpling up a piece of aluminum foil into a small ball.  Place this in your bottle.  See if you can sink it by squeezing the bottle… how about pumping it?  Small packets of soy sauce have also been known to work!

Use more pipets and vary their densities.  Try numbering your divers and see if you can make them sink in order.  Note that your divers are not yet sealed, and so they can be adjusted as many times as you like (colored water will leak out of them until they are sealed).

Educational Innovations carries a full line of Cartesian Diver materials, including Bob Becker’s DVD that demonstrates and discusses a plethora of fascinating diver designs.  Bob Becker, an award winning high school chemistry teacher, is a pioneer in the field of Cartesian divers.  This DVD includes DVD-ROM which contains additional resources such as project guides and templates.


Pocket Sound Blaster


Norm Barstow, Educational Innovationsby: Norman Barstow

Frequency, Wavelength and Pitch:

Sound is a tone you hear as the result of regular, evenly spaced waves of air molecules. The most noticeable difference is that some tones sound higher or lower than others. These differences are caused by variations in spacing between the waves; the closer the waves are, the higher the tone sounds. The spacing of the waves – the distance from the high point of one wave to high point of the next one – is the wavelength.

Read the rest of this entry »