The Speed of the Bubble Apparatus

Cynthia Houseby: Cindy House

Bubbles in tubes offer many advantages over spheres on ramps for velocity and acceleration experiments:

  • The bubble stays in the tube! There are no escaped marbles to chase down.
  • The bubble moves more slowly than a marble, permitting more accurate determination of elapsed time.
  • Results are highly reproducible.
  • Many data points can be collected in a short period of time.

The Speed of the Bubble Apparatus | Educational Innovations

A Speed of the Bubble Apparatus to hold and protect the tube is easy to construct from scrap and/or inexpensive materials. It enables even very young students to obtain highly reproducible data quickly. It also protects the tubes from being damaged if dropped or bumped.  Plans and suggested materials are included in this blog. The following experiment is one I use with the elementary students in our after school science club.The Speed of the Bubble Apparatus | Educational Innovations

The Speed of the Bubble Apparatus | Educational InnovationsEquipment (per pair of students)

1 bubble tube (22 inches long)

1 MyChron timer

1 bubble tube apparatus

hook/loop strap (optional)

data tables

per class of 30 students: 3 each of 15O, 30O, 45O, 60O , 75and  90blocks.

From start to finish this experiment can be comfortably accomplished within one hour if the tubes are already installed in the apparatus.  I first demonstrate how to use the apparatus, then ask the students at what angle they think the bubble will move most quickly and why. After recording their responses we start the experiment.

Speed of the Bubble Procedure:

Each pair of students selects an angle block; it makes no difference which degree value is chosen first. They push the block into the axis between the swing arm and base as far as it will go, securing it with the hook/loop strap.  The strap is optional, but it makes it easier for the children to hold the block in place when they’re tipping the apparatus.

The Speed of the Bubble Apparatus | Educational Innovations

One partner returns the bubble to the starting position before each trial by tipping the entire apparatus until the bubble gets to the end of the tube. She quickly, but gently, sets the apparatus base flat against the table as her partner prepares to start the timer when the front of the bubble touches the thirty centimeter line. He stops the timer when the front of the bubble touches the zero centimeter line.

The Speed of the Bubble Apparatus | Educational Innovations

They do three trials of each angle, then calculate and plot the average values using a bar or scatter chart.

Discussion:

When all teams finish collecting and analyzing their data, we compare and discuss the results.  The student teams found that either  45or 60produced the speediest bubbles.  Why might the same experiment produce two different answers? Does the difference between the 45and  60 results fall within the experimental error?  Is the real answer somewhere in between, perhaps  50O  or 55O ? Does the color of the tube, i.e. the viscosity of the liquid, make a difference?  What are sources of error in the experiment, for example, what would be the effect of not holding the angle block tightly against the arm/base axis during each trial? How might the experiment be changed to answer these questions? How many significant figures should be recorded for the times?

With additional time, students can determine if the speed of the bubble is constant throughout the length of the tube.  The procedure is similar to that of the first experiment. Students measure the time it takes to travel 10 centimeters, 20 centimeters, 30 centimeters, and 40 centimeters, conducting three trials for each distance.  Distance traveled versus average time is plotted on a scatter chart.  Does connecting the data points yield a straight line?  Is the speed constant? Discussion can include speed as the slope of a line, and, particularly if you have a calculator which automatically calculates this value, standard deviation.

The Speed of the Bubble Apparatus | Educational InnovationsThe Speed of the Bubble Apparatus | Educational InnovationsThe Speed of the Bubble Apparatus | Educational Innovations

5 Responses to The Speed of the Bubble Apparatus

  1. carly wilson says:

    I was wondering if you could tell me what the equation is that is used to determine the best angle for the speed of a bubble to travel….my physics teacher has not explained this and I have been unable to find it anywhere.

    Thank you.

    • Tami O'Connor says:

      Hi Carly,

      I have to admit, we do not have the equation readily available, however, if you ask your physics teacher I’m sure she/he can help you determine which equation would be best to use. Thanks for reading!

  2. Stacy Holland says:

    Can you provide us with the oil in the tubes? We are trying to make a matching density column.

    • Tami O'Connor says:

      Let me reach out to my manufacturer. I’m afraid the answer may be that it’s proprietary, but I’ll certainly ask and will get back to you.

      Tami
      Educational Innovations

  3. Kasey says:

    Do you know what liquids are in each of the tubes? We are curious and I can’t find the answer anywhere. Thank you!

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.